The glass cleaning machine is a special equipment for cleaning and drying the glass surface. When in use, the angle between the wind knife and the glass can be adjusted by yourself. You can adjust the angle as you want to clean it. You can put a piece of glass on the wind knife and adjust the distance between the wind knife and the glass surface to make it as close as possible. Let’s take a look at what a specific glass cleaning machine is and what is the angle between the wind knife of the glass cleaning machine and the glass!
1. What is a glass cleaning machine

The glass cleaning machine is a special equipment for cleaning and drying the glass surface before deep processing such as mirror making, vacuum coating, tempering, hot bending, and hollow glass lamination.
The glass cleaning machine is mainly composed of a transmission system, brushing, clean water rinsing, pure water rinsing, cold and hot air drying, and an electronic control system. According to user needs, medium and large glass cleaning machines are also equipped with manual (pneumatic) glass flip trolleys and inspection light sources.

2. What is the angle between the wind knife of the glass cleaning machine and the glass?

The wind knife of the glass cleaning machine removes water droplets attached to the surface of the glass through high-strength wind, so that the glass completes the drying process. The quality of the wind knife directly affects the effect of glass cleaning. A high-quality wind knife is the basic guarantee to ensure that the glass is dried to be clean, without water droplets or water marks. So during use, do you know what the angle between the wind knife and the glass of the glass cleaning machine is?
The angle problem can be adjusted by yourself. You can adjust the angle as you want to clean it. Also, put a piece of glass on the wind knife and adjust the distance of the wind knife to make it as close as possible to the glass surface, but not too close to avoid scratching the glass.

3. What is the principle of the glass cleaning machine?

After the transducer converts high-frequency electrical energy into mechanical energy, it will generate high-frequency vibrations with extremely small amplitude and propagate to the solution in the cleaning tank. Under the action of the transducer, a large number of tiny bubbles will continue to be generated inside the cleaning solution and burst instantly. The bursting of each bubble will generate hundreds of degrees of high temperature and nearly a thousand atmospheres of shock waves, thereby flushing the workpiece clean.
It can also be divided into two points to put it simply: First, after the flat glass is placed on the glass washing machine, the driving roller carries the glass into the brushing room, where it is brushed by a brush sprayed with water, then enters the rinsing room, where it is rinsed with pure water, and then enters the air drying room where a special high-pressure fan is used to completely peel off the water film to achieve a dry and clean cleaning effect. This type of Xinhe Hongguang glass washing machine is characterized by power saving, but it is noisy. Second, after passing through the brushing room and the rinsing room, only a breeze is used, and an electric drying system is added to achieve a dry and clean cleaning effect, which is characterized by high power consumption and low noise.